Load Tray 2
Tray 2 holds up to 250 sheets of 75 g/m
2
(20 lb) paper. If the paper is heavier, the tray does not hold as many
sheets. Do not overfill the tray. It supports cut sheet paper weight 60–120 g/m
2
(16–32 lb).
For information about the correct paper orientation for loading paper in this tray, see
Tray 2 paper
orientation on page 21.
CAUTION: Do not print envelopes, labels, or unsupported sizes of paper from Tray 2. Print these types of
paper only from Tray 1.
1. Pull the tray out and lift up slightly to remove it
completely from the product.
NOTE: Do not open the tray while it is in use.
2. Pinch the release that is located on the left guide
and slide the side guides to the correct paper
size.
18 Chapter 2 Paper trays ENWW
To Next Page
Loading...
