HP LASERJET PROFESSIONAL CP1020 - Select a custom page size with Windows; Select the paper type with Windows; Print on both sides (duplex) with Windows; Print on both sides manually

Select a custom page size with Windows
1. On the File menu in the software program, click Print.
2. Select the product, and then click the Properties or Preferences button.
3. Click the Paper/Quality tab.
4. Click the Custom button.
5. Type a name for the custom size and specify the dimensions.
●
The width is the short edge of the paper.
●
The length is the long edge of the paper.
NOTE: Always load paper into the trays short edge rst.
6. Click the Save button, and then click the Close button.
Select the paper type with Windows
1. On the File menu in the software program, click Print.
2. Select the product, and then click the Properties or Preferences button.
3. Click the Paper/Quality tab.
4. From the Type is drop-down list, click the More... option.
5. Select the category of paper types that best describes your paper, and then click the paper type that you
are using.
Print on both sides (duplex) with Windows
Print on both sides manually
1. Load paper face-up in the input tray.
ENWW Basic print tasks with Windows 51