EasyManuals Logo

HP LSI MegaRAID SAS 9260-8i User Manual

HP LSI MegaRAID SAS 9260-8i
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Step 1—Preparing for component installation
NOTE: Computer models vary. All illustrations are examples only.
Download and install updates
1.
Check for available system BIOS updates specified for your HP computer model and operating
system at
http://www.hp.com/support.
2.
Install the system BIOS updates, if available.
Accessing the internal components of the computer
1.
If you need help preparing the computer for this installation, consult the removal and replacement
procedures in the service guide for your computer at
http://www.hp.com/support/manuals.
2.
Power down the computer, and then disconnect the power cord.
3.
Power down all external devices, and then disconnect them from the computer.
4.
Remove the side access panel.
Removing components
1.
If present, remove the card support to enable access to the expansion slots and system board
connectors.
2.
Select an appropriate PCIe2 x16 or x8 expansion slot on the system board. Any other slot may
result in sub-optimal performance.
NOTE: To identify an available PCIe expansion slot, see the service label on the side access
panel.
Figure 1 Removing the expansion slot cover
ENWW
Step 1—Preparing for component installation
3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP LSI MegaRAID SAS 9260-8i and is the answer not in the manual?

HP LSI MegaRAID SAS 9260-8i Specifications

General IconGeneral
BrandHP
ModelLSI MegaRAID SAS 9260-8i
CategoryDesktop
LanguageEnglish

Related product manuals