HP LSI MegaRAID SAS 9260-8i User Manual

Step 2—Installing the controller card
CAUTION: Do not install the SAS RAID controller card between two high-powered cards.
1.
Install the SAS RAID controller card into the selected PCIe expansion slot on the system board.
Ensure that the card is fully seated in the expansion slot.
2.
Close the expansion slot retention clamp to secure the card in the slot.
Figure 2 Installing the SAS RAID controller card
4 LSI MegaRAID SAS 9260-8i card installation ENWW

HP LSI MegaRAID SAS 9260-8i Specifications

General

Brand	HP
Model	LSI MegaRAID SAS 9260-8i
Category	Desktop
Language	English