HP LTO-6 Ultrium FH SAS

Table 4 Power specifications for LTO Ultrium half-height tape drives (continued)
Ultrium LTO-3LTO-4 UltriumLTO-5 UltriumLTO-6 Ultrium
+12V @ 2.1A
maximum)
+12V @ 2.1A
maximum
+12V @ 1.9A maximum+12V @ 2.5A maximum
100 to 240 VAC, 50-60
Hz, auto-ranging, 0.8A
maximum
100 to 240 VAC, 50-60
Hz, auto-ranging,
0.8A maximum
100 to 240 VAC, 50-60
Hz, auto-ranging, 0.8A
maximum
100 to 240 VAC, 50-60
Hz, auto-ranging, 0.8A
maximum
Power
requirements,
external
tape
drives
Table 5 Power specifications for LTO Ultrium full-height tape drives
LTO-5 UltriumLTO-6 Ultrium
7.5 Watts idle,4.5 Watts idle (hibernate)Power
consumption
24 Watts typical,29 Watts typical (writing)
40 Watts maximum42 Watts maximum
+5V @ 3.6A typical+5V @ 3.5A typicalPower
requirements
+5V @ 3.7A maximum+5V @ 3.9A maximum
+12V @ 0.7A typical+12V @ 0.6A typical
+12V @ 2.2A maximum+12V @ 2.5A maximum
100 to 240 VAC, 50-60 Hz, auto-ranging, 0.8A
maximum
100 to 240 VAC, 50-60 Hz, auto-ranging, 0.8A
maximum
Power
requirements,
external
tape drives
Table 6 Performance and capacity specifications
LTO-3 UltriumLTO-4 UltriumLTO-5 UltriumLTO-6 Ultrium
400 GB Native800 GB Native1.5 TB Native2.5 TB NativeCapacity
800 GB Compressed1.6 TB Compressed3 TB Compressed6.25 TB Compressed
60 MB/s Native80 MB/s Native140 MB/s Native160 MB/s NativeSustained
transfer rate
120 MB/s
Compressed
160 MB/s
Compressed
280 MB/s
Compressed
400 MB/s
Compressed
LTO Ultrium 1 (read
only)
LTO Ultrium 2 (read
only)
LTO Ultrium 3 (read
only)
LTO Ultrium 4 (read
only)
Media
compatibility
LTO Ultrium 2 (read
and write)
LTO Ultrium 3 (read
and write)
LTO Ultrium 4 (read
and write)
LTO Ultrium 5 (read
and write)
LTO Ultrium 3 (read
and write)
LTO Ultrium 4 (read
and write)
LTO Ultrium 5 (read
and write)
LTO Ultrium 6 (read
and write)
26 Specifications and requirements