HP M5025 - LaserJet MFP B/W Laser - Page 111

Remote firmware updates
Introduction
The HP LaserJet M5025 MFP and HP LaserJet M5035 Series MFP devices feature remote firmware
update (RFU) capability. The method for downloading remote firmware updates from the Web site is
similar to that used to download the latest printing-system software and print drivers.
The process for remotely upgrading firmware involves three steps:
1. Print a configuration page to see what version of firmware is currently installed on the device. Also,
print a menu map to see what features are in this version of the firmware.
2. Go to the HP Web site and download the latest firmware to the computer.
3. Download the new firmware to the device. Print a new menu map to compare feature changes
between the previous firmware and upgraded firmware.
Topics:
●
Print the configuration page
●
Downloading the new firmware from the HP Web site
●
Downloading the new firmware to the device
●
Troubleshooting firmware updates
●
Remote firmware update by using FTP through a browser
●
Remote firmware update by using FTP on a direct network connection
●
Remote firmware update through a local MS Windows port
●
Remote firmware update through a USB port
●
Remote firmware update through an MS Windows network
●
Remote firmware update for UNIX systems
●
Remote firmware update by using the LPR command
●
Remote firmware update through HP Web Jetadmin
Print the configuration page
To determine the current level of firmware, view the configuration page. To print a configuration page,
follow these instructions.
1. Touch Administration.
2. Touch Information.
3. Touch Configuration/Status Pages.
4. Touch Configuration Page.
5. Touch Print.
ENWW Remote firmware updates 81