Staple stacker driver PCA
Concave notch
Jogger position sensor flag
<Turnout position>
<Waiting position for letter size paper>
<Alignment position for letter size paper>
Jogger motor
Jogger position sensor
SR2102
Figure 4-66 Jogger position control
NOTE The staple stacker driver rotates the motor (M2100) and performs the detection, even
when the jogger guide is already at the turnout position.
Stamping control
The stamping control holds the piles of paper on the jogger guide so subsequent pages do not push
away the paper. The pad on the right part of the delivery guide moves up and down. This operation is
performed by controlling the stamp solenoid (SL1102).
172 Chapter 4 Theory of operation ENWW
To Next Page
Loading...