Front end cover (cap)
1. Remove the ADF. See ADF assembly on page 204.
2. Open the ADF jam cover and remove one screw (callout 1).
Tip This screw has a star washer. Make sure that you use the correct screw when you
reinstall the front end cover.
Figure 5-63 Remove the ADF front end cover (1 of 4)
3. Turn the ADF over and remove three screws (callout 2).
2
Figure 5-64 Remove the ADF front end cover (2 of 4)
ENWW ADF 219
To Next Page
Loading...