6. Carefully release two tabs (callout 3) along the top edge of the rear end cover and rotate the cover
off and away from the ADF.
NOTE Before you remove the cover, look at how the tab on the cover fits underneath the
tab on the ADF chassis (callout 4). Make sure that you do not break the tabs when you
remove the cover.
3
4
Figure 5-71 Remove the ADF rear end cover (5 of 5)
7. When you reinstall the ADF rear end cover, the tab on the cover near the ADF jam access door
must be positioned under the tab on the ADF chassis.
Figure 5-72 Reinstall the ADF rear end cover
ENWW ADF 223
To Next Page
Loading...