Face-down cover
1. Open the print cartridge door and remove one screw (callout 1). Slightly lift up on the cover and
release one tab (callout 2).
2
Figure 5-176 Remove the base unit face-down cover (1 of 2)
2. Remove the face-down cover.
CAUTION Do not break off the face-down cover front locking tab.
Figure 5-177 Remove the base unit face-down cover (2 of 2)
Tip When you reinstall the face-down cover, make sure that the three tabs are properly
inserted in the paper delivery assembly.
ENWW Print engine (base unit) 291
To Next Page
Loading...