Supported media weights and sizes
This section contains information about the sizes, weights, and capacities of paper and other print media
that each tray supports.
Table 6-3 Tray 1 specifications
Media type Dimensions
1
Weight Capacity
2
Paper Minimum: 76 x 127 mm
(3 x 5 inches)
Maximum: 312 x 470 mm
(12.25 x 18.5 inches)
60 to 199 g/m
2
(16 to 53 lb) Up to 100 sheets of 60 to 120 g/m
2
(16 to 32 lb) paper.
Fewer than 100 sheets of
120 to 199 g/m
2
(32 to 53 lb) paper
(maximum stack height: 13 mm or
0.5 inch)
Transparencies and opaque
film
Minimum: 76 x 127 mm
(3 x 5 inches)
Maximum: 312 x 470 mm
(12.25 x 18.5 inches)
Thickness: 0.10 to 0.13 mm
(4 to 5 mils)
Up to 13 mm (0.5 inch) stack height
Labels
3
Minimum: 76 x 127 mm
(3 x 5 inches)
Maximum: 312 x 470 mm
(12.25 x 18.5 inches)
Thickness: up to 0.23 mm (up to
9 mils)
Up to 13 mm (0.5 inch) stack height
Envelopes Minimum: 76 x 127 mm
(3 x 5 inches)
Maximum: 312 x 470 mm
(12.25 x 18.5 inches)
75 g/m
2
to 90 g/m
2
(20 to 24 lb)
Up to 10 envelopes
1
The device supports a wide range of standard and custom sizes of print media. Check the printer driver for supported sizes.
2
Capacity can vary depending on media weight and thickness, and environmental conditions.
3
Smoothness: 100 to 250 (Sheffield).
Table 6-4 Tray 2 specifications
Media type Dimensions
1
Weight Capacity
2
Paper Minimum: 148 x 210 mm
(5.83 x 8.27 inches)
Maximum: 297 x 364 mm
(11.7 x 14.33 inches)
60 to 120 g/m
2
(16 to 32 lb)
Up to 250 sheets
1
The device supports a wide range of standard and custom sizes of print media. Check the printer driver for supported sizes.
2
Capacity can vary depending on the media weight and thickness, and environmental conditions.
Table 6-5 Tray 3 specifications
Media type Dimensions
1
Weight Capacity
2
Paper Minimum: 148 x 210 mm
(5.83 x 8.27 inches)
60 to 120 g/m
2
(16 to 32 lb)
Up to 250 sheets
444 Chapter 6 Troubleshooting ENWW
To Next Page
Loading...