Boot key sequences
Boot key sequences are accessed while the device is initializing after the power is turned on. Service
mode functions include the following functions:
●
Low-level boot key sequences
●
Select Language
●
Cold Reset
●
Embedded LAN Enable/Disable
●
New Document Feeder Kit
●
New Maintenance Kit
●
Mid-level boot key sequences
●
Initialize Disks
●
High-level boot key sequences
●
Skip Disk Load
●
NVRAM Initialization
●
Skip Calibration (not used on this MFP)
●
Engine test (formatter removed)
●
Service ID (restoring and converting)
●
Calibrate the scanner
502 Chapter 6 Troubleshooting ENWW
To Next Page
Loading...