HP M5025 - LaserJet MFP B/W Laser - Page 538

Select this item to set the number of pages that have been printed since the last document feeder
kit was installed or the total number of pages that have been printed on this device if a document
feeder kit has not yet been installed (during the first 60,000 pages).
●
Document Feeder Kit Interval
Select this item to specify the number of pages (usually 60,000) that can be printed before a
Replace Document Feeder Kit message appears on the control-panel display to indicate a
maintenance kit is needed.
●
ADF Count
Select this item to set the total number of pages that have been fed through the ADF.
●
Flatbed Count
Select this item to set the total number of pages that have been scanned on the flatbed glass.
●
ADF Simplex Count
Select this item to set the total number of simplex pages that have been fed through the ADF.
●
ADF Duplex Count
Select this item to set the total number of duplex pages that have been fed through the ADF.
●
Copy Scan Count
Select this item to set the number of copy pages that have been scanned.
●
Send Scan Count
Select this item to set the number of scanned pages that have been sent to e-mail.
●
Copy Pages Count
Select this item to set the number of scanned pages that have been printed.
●
Scanner Settings menu
508 Chapter 6 Troubleshooting ENWW