Table 7-27 Internal components (3 of 3) (print engine)
Ref Description Part number Qty
1 Cam, pad return, upper 1
2 Holder, sensor 1
3 Plate, frame auxiliary 1
4 Photo interrupter, TLP1243 WG8-5696-000CN 2
5 Screw, D, M3X6 6
6 Cable, feed sensor 1
7 Left cassette rail assembly RM1-2970-000CN 2
8 Right cassette rail assembly RM1-2971-000CN 2
9 Plate, cross member auxiliary RC1-7264-000CN 1
10 Holder, top sensor RC1-7268-000CN 1
11 Guide, duplexer, front RC1-8027-000CN 1
12 Holder, cassette, right front RC1-8035-000CN 1
13 Holder, cassette, left front RC1-8036-000CN 1
14 Cam, pad return, lower RC1-8038-000CN 1
15 Guide, duplexer, rear RC1-8048-000CN 1
16 Guide, path, lower 1
17 Holder, power supply link guide 1
18 Joint, power supply switch 1
19 Link, power supply switch 1
20 Rod, power switch 1
21 Spring, torsion 1
22 Spring, torsion RU5-2596-000CN 1
23 Flag, loop sensor RC1-7144-000CN 1
24 Spring, torsion RC1-7145-000CN 1
25 High voltage power supply assembly (110–127 V) RM1-2957-000CN 1
25 High voltage power supply assembly (220–240 V) RM1-2958-000CN 1
26 Screw, M3X8 6
27 Back end sensor assembly RM1-2968-000CN 2
28 Right lower handle assembly 1
29 Plate, cassette positioning 1
30 Bushing RC1-7249-000CN 2
31 Flag, top sensor RC1-7261-000CN 1
32 Holder, cassette, rear 2
33 Lock, pressure release, rear 1
ENWW Internal components (print engine; 3 of 3) 645
To Next Page
Loading...