Default Print Options
NOTE Values shown with “(default)” are the factory-default values. Some menu items have no
default.
Table 3-7 Default Print Options menu
Menu item Sub-menu item Values Description
Copies Per Job 1 to 32,000 Use this feature to set the default number of copies for
print jobs.
Default Paper Size (List of supported sizes.) Choose a paper size that will be used when the driver
doe not specify a size.
Default Custom Paper
Size
Unit of measure Millimeters
Inches
Configure the default paper size that is used when the
user selects Custom as the paper size for a print job.
X Dimension Configure the width measurement for the Default
Custom Paper Size.
Y Dimension Configure the height measurement for the Default
Custom Paper Size.
Output Bin Standard output bin
(default)
Stacker bin
Select the default output bin for print jobs.
Print Sides 1-sided (default)
2-sided
Use this feature to select whether print jobs should be
single-sided or double-sided by default.
2-Sided Format Book style
Flip style
Use this feature to configure the default style for 2-
sided print jobs. If Book style is selected, the back side
of the page is printed the right way up. This option is
for print jobs that are bound along the left edge. If Flip
style is selected, the back side of the page is printed
upside-down. This option is for print jobs that are bound
along the top edge.
NOTE This option only appears if the 2-
sided value is selected in the Print Sides sub-
menu.
44 Chapter 3 Manage and maintain the device ENWW
To Next Page
Loading...