Device Behavior menu
NOTE Values shown with "(default)" are the factory-default values. Some menu items have no
default.
Table 3-15 Device Behavior menu
Menu item Sub-menu item Sub-menu item Values Description
Language Select the language
from the list.
Use this feature to select a different language
for control-panel messages. When you select
a new language, the keyboard layout might
also change.
Key Press Sound On (default)
Off
Use this feature to specify whether you hear
a sound when you touch the screen or press
buttons on the control panel.
Inactivity Timeout Type a value
between 10 and 300
seconds. The factory
default is 60
seconds.
Use this feature to specify the amount of time
that elapses between any activity on the
control panel and the device resetting to the
default settings.
Warning/Error
Behavior
Clearable Warnings On
Job (default)
If this feature is enabled, a clearable warning
appears on the control panel until the error is
cleared.
Continuable Events Auto continue (10
seconds) (default)
Touch OK to
continue
Use this option to configure the device
behavior when the device encounters certain
errors.
Jam Recovery Auto (default)
On
Off
Use this feature to configure how the device
handles pages that are lost during a jam.
Stapler/Stacker
NOTE
This item
appears
only if a
stapler/
stacker is
installed.
Staple None
One left angled
Use this feature to set stapling characteristics
for the device.
Staples Out Continue (default)
Stop
60 Chapter 3 Manage and maintain the device ENWW
To Next Page
Loading...