HP M527dn

HP Inc.
HP LaserJet Enterprise MFP M527 Series,
Color LaserJet Enterprise MFP M577 Series, and
PageWide Enterprise Color MFP 586 Series
Firmware with Jetdirect Inside Security Target
Version: 2.0 Copyright © 2008-2016 by atsec information security corporation and HP Inc. Page 9 of 98
Last update: 2016-06-07 or its wholly owned subsidiaries
The MFP models for which the firmware is evaluated are listed in the following table along with the
evaluated firmware version numbers for each model:
Product Family
Models
TOE Firmware Version
LaserJet Enterprise MFP M527
Series
MFP M527dn
MFP M527f
Flow MFP M527c
Flow MFP M527z
System Firmware version:
2307781_551187
Jetdirect Inside version:
JSI23700101
Color LaserJet Enterprise MFP
M577 Series
MFP M577dn
MFP M577f
Flow MFP M577c
Flow MFP M577z
System Firmware version:
2307781_551183
Jetdirect Inside version:
JSI23700101
PageWide Enterprise Color MFP
586 Series
MFP 586dn
MFP 586f
Flow MFP 586z
System Firmware version:
2307781_551192
Jetdirect Inside version:
JSI23700101
Table 1: TOE Reference
Each model provides the following security features:
 Auditing
 Cryptography
 Identification and authentication
 Data protection and access control
 Protection of the TSF (restricted forwarding, TSF self-testing, timestamps)
 TOE access protection (inactivity timeout and automatic logout)
 Trusted channel communication and certificate management
 User and access management
1.4.1 Required and optional non-TOE hardware, software, and firmware
The following required firmware components are considered part of the Operational Environment:
 Operating system (included in the firmware)
 QuickSec cryptographic library module (included in the firmware)
The hardware portion of the HP MFP models is considered part of the Operational Environment. The TOE
is evaluated on all of the HP MFP models defined in Table 1 and requires one of these models in order to
run in the evaluated configuration.
The following required components are part of the Operational Environment: