HP m550 - Setting and App Usage; Download and Connect Go Moto App

13
2 Setting
2.1 Download Go Moto app
The Moto Cam allows you to connect to the smart phone to preview, set-up
camera, synchronize date/time and calibrate topple-over detection. When using
the Moto Cam for the first time, download and install [Go Moto ] app from your
smart phone.
1. Download Go Moto application from Google Play Store or Apple App
Store.
2. Complete the installation.
2.2 Wi-Fi Connection
1. Press the button on Easy Pad for 3 seconds to turn on Wi-Fi.
2. Using the Wi-Fi function of your smart phone, search for the Moto Cam ID
“hp_m550_123456” from the list (last 6 numbers are system random
numbers). Enter default password 12345678 to connect with Moto Cam.
3. Use downloaded app Go Moto to start setting or operating other functions.
Note:
1. Wi-Fi is default ON for 3 minutes when power on. If there is no connection with app within 3 minutes, Wi-Fi will
be turned off automatically. To turn on again Wi-Fi, long press Easy Pad button for 3 seconds.
2. The smart phone shall be within a maximum of a 5m distance from the host without any buildings in between.
3. The language of the [Go Moto] app will be consistent with your smart phone, beyond the language options, the
App will be activated with default language.
APP layout and features may be changed subject to different
software versions. Please refer to Google Play or APP Store for
update.