19
2.3.4 Camera Setting
You can use this feature to set up your car camcorder.
1. Touch icon [Camera Setting].
2. Refer to the below table for details of menu items and available menu
options.
Menu Option Description Available options
Phone
Synchronization
To synchronize date/time with
camcorder.
Yes / No
Set Time Zone
To set up time zone in order to auto
sync date/time once GPS is positioned.
GMT -12 ~ GMT +12
Speed Unit Set up speed unit. Km/h, mph
Car Speed
Watermark
To turn on or off car speed watermark. On / Off
Speed Cam
Alert
When this function is enabled and GPS
is positioned, once your scooter is
approaching speed cam, the LED on
Easy Pad will flash quickly.
*If there is no speed cam map datum
built-in, the LED will not flash quickly.
On / Off
Record Interval
Save respective video files in a length
of the selected duration.
1 min / 3 min / 5 min
Voice Record Setting voice record in the video. On / Off
Intelligent
Noise Reduce
If turn on this feature, it can suppress
surrounding noises and deliver human
voice more clear.
On / Off
Anti-flicker
Domestic power supply varies by area.
It is recommended that you should
check the “Table of voltage and
frequency of different countries” for
the correct setting.
50Hz / 60Hz
Tilt Detection
When the host is installed completely,
please use this function to calibrate
topple-over detection.
OK / Cancel
Default Return to factory default setting. Yes / Cancel
Format
To format the memory card, all the files
in the camcorder will be deleted.
Yes / Cancel
Wi-Fi Setting
To set up Wi-Fi password
Firmware
Version
Indicates the current camcorder’s
firmware version.
APP Version
Indicates the current application
version.
To Next Page
Loading...