5. Remove the orange protective cover from the print cartridge. Place the protective cover on the used
print cartridge to protect it during shipping.
CAUTION: Avoid prolonged exposure to light.
Do not touch the green roller. Doing so can damage the cartridge.
NOTE: Store the used print cartridge in the protective bag removed from the replacement cartridge.
Information about recycling used print cartridges is contained in the print-cartridge box.
6. Align the print cartridge with its slot and insert the print cartridge until it clicks into place.
7. Close the front door.
ENWW Removal and replacement procedures 87
To Next Page
Loading...