Boot sequence
◦
1/8 = 10 seconds
◦
2/8 = 15 seconds
NOTE: Depending on how the product was shut down, the product might stay at this point for
several minutes while the Disk Check process completes.
◦
7/8 = 25 seconds
◦
8/8 = 35 seconds
●
36 seconds; hardware Initialization begins
●
45 seconds; initialization n count begins
●
01:30 seconds; fuser fan noise stops and engine noises stop
●
01:50 seconds; product enters the Ready state
272 Chapter 3 Solve problems ENWW
To Next Page
Loading...