HP M750 series

Table 3-29 General Settings menu (continued)
First level Second level Third level Fourth level Values Description
Sleep Timer Settings Sleep/Auto Off After Enable
Disable
Range: 0 to 120
minutes
Default = 60 minutes
Set the number of
minutes after which
the product enters
Sleep Mode/Auto Off
After. Use the arrow
buttons on the control
panel to increase or
decrease the number
of minutes.
NOTE: For units sold
in Europe (Blue Angel),
there will be no option
to disable sleep.
NOTE: Setting this
value to “0” will cause
the product to
attempt to enter sleep
as soon as possible.
Wake/Auto On to
These Events
All Events*
Network port
Power button only
All Events: product
enters a Suspend
state, and not Deep
Suspend.
Network port: product
enters both a Suspend
state, and at Deep
Suspend state. Both
network jobs, and any
jobs listed in All
Events wake the
product.
Power button only:
product will not enter
a Deep Suspend, but it
will power off and you
must press the power
button to restart the
product.
Optimum Speed/
Energy Usage
Faster first page*
Save energy
Save more energy
Save most energy
Specifies how much
the fuser cools down
between print or copy
jobs. To maximize the
product speed, select
the Faster first page
option. To maximize
energy conservation,
select the Save most
energy option. Or,
select one of the other
settings to
compromise between
speed and energy
conservation.
ENWW Tools for troubleshooting 349