HP M750 series

Table 3-29 General Settings menu (continued)
First level Second level Third level Fourth level Values Description
X1 Shift
Y1 Shift
X2 Shift
Y2 Shift
-5.00 mm to 5.00 mm X is the direction that
is perpendicular to the
way the paper passes
through the product.
This is also known as
the scan direction. X1
is the scan direction
for a single-sided
page or for the second
side of a two-sided
page. X2 is the scan
direction for the first
side of a two-sided
page.
Y is the direction that
the paper feeds
through the product.
Y1 is the feed
direction for a single-
sided page or for the
second side of a two-
sided page. Y2 is the
feed direction for the
first side of a two-
sided page.
Auto Sense Mode Tray 1 Sensing Full sensing
Expanded sensing*
Transparency Only
Configure which paper
types the product
should automatically
sense. The following
settings are available:
Full sensing: Use this
setting if you don't
want media type
misprints and can
accept slower
performance and
possible decreased
cartridge life.
Expanded sensing:
The product senses
only the first page and
assumes the rest of
the pages are the
same type.
Transparency Only:
The product senses
only the first page.
The product
distinguishes
transparencies from
other paper types.
352 Chapter 3 Solve problems ENWW