HP M750 series

Table 3-29 General Settings menu (continued)
First level Second level Third level Fourth level Values Description
Tray X Sensing Expanded sensing*
Transparency Only
When Configuring the
Auto Sense Mode
option for Tray 1 and
Tray 2, the <x>
variable represents
the highest number of
trays installed on the
product.
Adjust Paper Types Select from a list of
paper types that the
product supports. The
available options are
the same for each
paper type.
Print Mode Select from a list of
print modes.
Changing the Print
Mode setting is
usually the first step
in trying to resolve
print-quality
problems. Problems
can include toner not
sticking well to the
page, a faint image of
the page repeated on
the same or following
page, incorrect gloss
level, etc.
Resistance Mode Normal mode
Up
Down
Use this setting to
correct print quality
problems in low-
humidity
environments with
highly resistive paper.
Use the Up option to
solve print quality
problems that are
related to poor toner-
transfer. Use the
Down option in the
event that small, “pin-
hole” defects occur.
Humidity Mode Normal
High
Use this setting to
correct print quality
problems in high-
humidity
environments. Use the
High setting if you are
in a high-humidity
environment and you
are seeing problems
with low toner density
on the first page of a
job.
Pre-Rotation Mode Off
On
Turn on if horizontal
lines appear on pages.
Using this feature
increases the first-
page-out time by a
few seconds.
ENWW Tools for troubleshooting 353