HP M750 series

Table 3-29 General Settings menu (continued)
First level Second level Third level Fourth level Values Description
Fuser Temp Mode Normal
Up
Down
If you continue to see
ghost images on your
print jobs after
adjusting the Print
Mode setting, set this
feature by using the
Up option or Down
option. Using this
mode increases wear
on product parts and
might also slow down
the printing process.
Paper Curl Mode Normal
Reduced
If excessive curling of
paper occurs in warm,
high-humidity
environments above
23° C (73° F), use the
Reduced setting.
Using this setting
slows printing and
increases the
frequency of
consumable
replacements.
Restore Modes
Optimize Normal Paper Standard*
Smooth
Use to optimize
various print modes
that address print
quality issues.
Use the Smooth
setting to correct print
quality problems
when using very
smooth paper of
normal weight.
Heavy Paper Standard*
Smooth
Use this setting to
correct print quality
problems when using
very smooth, heavy-
weight paper 129-216
g/m
2
(32-58 lb). The
Smooth setting should
be used if you are
having print quality
problems with very
smooth, heavy paper.
Envelope Control Normal*
Reduced Temp
If envelopes are
sticking together in
the output bin, use
this setting to reduce
the fuser
temperature.
354 Chapter 3 Solve problems ENWW