HP M750 series

Table 3-29 General Settings menu (continued)
First level Second level Third level Fourth level Values Description
Environment Normal*
Low Temp
Enable if the product
is operating in a low
temperature
environment and you
are having problems
with print quality,
such as blisters in the
printed image.
Line Voltage Normal*
Low Voltage
Enable if the product
is operating in a low -
voltage environment
and you are having
problems with print
quality, such as
blisters in the printed
image.
Tray 1 Normal*
Alternate
Affects how often the
product performs an
internal cleaning
procedure. Use the
Alternate setting if
you are having
problems with extra
toner on pages. In this
mode, the product
performs the cleaning
procedure after each
job that is printed
from Tray 1. Using this
mode increases wear
on all the toner
cartridges.
Background Normal*
Alternate 1
Alternate 2
Alternate 3
Use if pages are
printing with a shaded
background. Using
this feature might
reduce gloss levels.
Use the Alternate 1
setting if you are
seeing a shaded
background on the
entire page. Use the
Alternate 2 setting if
you are seeing thin
vertical lines on the
background. The
Alternate 3 setting
applies the Alternate 1
setting and the
Alternate 2 setting at
the same time. Use
this setting if the first
two settings do not
correct the problem.
ENWW Tools for troubleshooting 355