HP M750 series

Table 3-30 General Print Settings menu (continued)
First level Second level Values Description
Wide A4 Enabled
Disabled*
Changes the printable area of A4-
size paper. If enabled, eighty 10-
pitch characters can be printed on
a single line of A4 paper.
Suppress Blank Pages No*
Yes
Print PS Errors Enabled
Disabled*
Selects whether a PostScript (PS)
error page is printed when the
product encounters a PS error.
Print PDF Errors Enabled
Disabled*
Selects whether a PDF error page
is printed when the product
encounters a PDF error.
Personality Auto*
PCL
POSTSCRIPT
PDF
Configures the default print
language or personality for the
product. Normally you should not
change the product language. If
you change the setting to a specific
product language, the product
does not automatically switch
from one language to another
unless specific software
commands are sent to it.
PCL Form Length Range: 5 – 128
Default = 60
Controls the PCL print-command
options. PCL is a set of product
commands that Hewlett-Packard
developed to provide access to
product features.
Use the Form Length feature to
select the user-soft default
vertical form length.
Orientation Portrait*
Landscape
Select the orientation that is most
often used for copy or scan
originals. Select the Portrait option
if the short edge is at the top, or
select the Landscape option if the
long edge is at the top.
Font Source Internal*
USB
Selects the font source for the
user-soft default font. The list of
available options varies depending
on the installed product options.
Font Number Range: 0 – 110
Default = 0
Specifies the font number for the
user-soft default font using the
source that is specified in the Font
Source menu. The product assigns
a number to each font and lists it
on the PCL font list. The font
number displays in the Font #
column of the printout.
362 Chapter 3 Solve problems ENWW