Table 3-31 Default Print Options menu
First level Second level Values Description
Number of Copies Range: 1 – 32000
Default = 1
Sets the default number of copies
for a copy job. This default applies
when the Copy function or the
Quick Copy function is initiated
from the product Home screen.
Default Paper Size Select from a list of sizes that the
product supports.
Configures the default paper size
used for print jobs.
Default Custom Paper Size X Dimension Range: 3 – 8.5 inches
Default = 8.5 inches
Configures the default paper size
that is used when the user selects
Custom as the paper size for a
print job.
Y Dimension Range: 5 – 14 inches
Default = 14 inches
Use Inches Enabled*
Disabled
Sides
NOTE: Available only when
duplexing is enabled.
1-sided*
2-sided
Specifies whether the original
document is printed on one or both
sides, and whether the copies
should be printed on one or both
sides. For example: select the 1-
sided original, 2-sided output
option when the original is printed
on one side, but you want to make
two-sided copies.
Select the Orientation setting to
specify portrait or landscape
orientation and to select the way
the second sides are printed.
2-Sided Format
NOTE: Available only when
duplexing is enabled.
Book-style*
Flip-style
Configures the default style for 2-
sided print jobs. If the Book-style
option is selected, the back side of
the page is printed with the right
side up. This option is for print jobs
that are bound along the left edge.
If the Flip-style option is selected,
the back side of the page is printed
upside-down. This option is for
print jobs that are bound along the
top edge.
Edge-to-Edge Normal (recommended)*
Edge-to-Edge output
Use to avoid shadows that can
appear along the edges of copies
when the original document is
printed close to the edges.
364 Chapter 3 Solve problems ENWW
To Next Page
Loading...