HP M750 series

Table 3-36 Jetdirect Menu (continued)
First level Second level Third level Fourth level Values Description
Default IP Auto IP*
Legacy
Specify the IP address
for the product to
default to when the
print server is unable
to obtain an IP
address from the
network during a
forced TCP/IP
reconfiguration (for
example, when
manually configured
to use BootP or
DHCP).
NOTE: This feature
assigns a static IP
address that might
interfere with a
managed network.
Auto IP: A link-local IP
address 169.254.x.x is
set.
Legacy: The address
192.0.0.192 is set,
consistent with older
HP Jetdirect products.
Primary DNS Range: 0 – 255
Default =
xxx.xxx.xx.xx
Specify the IP address
(n.n.n.n) of a Primary
Domain Name System
(DNS) Server.
Secondary DNS Range: 0 – 255
Default = 0.0.0.0
Specify the IP address
(n.n.n.n) of a
Secondary DNS
Server.
IPV6 Settings Enable Off
On*
Enable or disable IPv6
operation on the print
server.
Off: IPv6 is disabled.
On: IPv6 is enabled.
Address Manual Settings Enable
Address
Enable and manually
configure a TCP/IPv6
address.
ENWW Tools for troubleshooting 373