HP M750 series

Recommended action
Load tray with requested paper.
If paper is already in tray, press the Help button to exit the message, and then press the OK button to print.
To use another tray, clear paper from Tray 1, press the Help button to exit the message and then press the
OK button.
Moving solenoid
Description
The solenoid is moving as part of a component test.
Recommended action
To exit press X
Moving solenoid and motor
Description
The solenoid and a motor are moving as part of a component test.
Recommended action
To exit press X
No job to cancel
Description
You have pressed the stop button, but the product is not actively processing any jobs.
Recommended action
No action necessary.
Paused
Description
The product is paused, and there are no error messages pending at the display. The I/O continues receiving
data until memory is full.
Recommended action
Press the Stop
button.
Performing Color Band Test…
Description
A color-band test is being performed.
Recommended action
No action necessary.
474 Chapter 3 Solve problems ENWW