Change jam recovery
This product provides a jam recovery feature that reprints jammed pages. The following options are
available:
●
Auto — The product attempts to reprint jammed pages when enough memory is available. This is the
default setting.
●
Off — The product does not try to reprint jammed pages. Because no memory is used to store the most
recent pages, performance is optimal.
NOTE: When using this option, if the product runs out of paper and the job is being printed on both
sides, some pages can be lost.
●
On — The product always reprints jammed pages. Additional memory is allocated to store the last few
pages printed. This might cause overall performance to suffer.
Set the jam recovery feature
1. Press the Home button
.
2. Open the following menus:
●
Administration
●
General Settings
●
Jam Recovery
3. Press the Down arrow or Up arrow
/ button to highlight the appropriate setting, and then press the
OK button.
4. Press the Home button
to return to the Ready state.
ENWW Clear jams 509
To Next Page
Loading...