Table 3-63 Preboot menu options (5 of 5)
Menu option First level Second level Third level Description
Administrator
Tools
Diagnostics The Diagnostics feature helps to diagnose hardware
failures and allow service technicians to identify and
replace only the hardware components that have failed
on a device.
[x] Memory []Do not run
[]Short
[]Long
Enables testing of system memory (RAM).
Enabled by default.
[x] Disk [] Do not run
[] Short
[] Long
[] Optimized
Enables testing of the disk drive.
Enabled by default.
NOTE: This test takes a long time to execute.
[x] ICB Enables testing of the ICB board.
Enabled by default.
[x] CPB Enables testing of the CPB board.
Enabled by default.
[x]
Interconnect
Enables a quick ping test for connectivity. Enabled by
default.
Checks for the presence of the boot disk, checks for
connectivity with the control panel, checks I2C
communications with the controller used for power
management.
Remote Admin Start Telnet
Stop Telnet
Refresh IP
The Remote Admin feature provides the service
technician a valuable way to access a printer in its BIOS
environment without physically having to be at the
device.
The product acts as a Telnet server which is a well-
accepted standard networking protocol for transmitting
textual data. This implementation allows any standard
Telnet client to display the BIOS screen as well as receive
keyboard input for navigation and allows the user to
interact with the BIOS as if he were standing right at the
device.
System Triage Copy Logs Copy Logs will place existing log files onto a USB
Thumbdrive inserted into the device. The drive must be
FAT32 formatted.
Service Tools This item requires the Service access code.
Reset Admin
Password
Use this item to clear the Administrator password.
Subsystems For manufacturing use only. Do not change these values.
534 Chapter 3 Solve problems ENWW
To Next Page
Loading...