9 Specifications
Input power
The power information in this section may be helpful if you plan to travel internationally with the
computer.
The computer operates on DC power, which can be supplied by an AC or a DC power source. The
AC power source must be rated at 100–240 V, 50–60 Hz.
Although the computer can be powered from a standalone DC power source, it should be powered
only with an AC adapter or a DC power source supplied and approved by HP for use with this
computer.
The computer can operate on DC power within the following specifications.
Input power Rating
Operating voltage 19 V dc @ 1.58 A - 30W
Operating current 1.58 A
NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not
exceeding 240 V rms.
NOTE: The computer operating voltage and current can be found on the system regulatory label
under the vanity cover of the computer.
Input power 43
To Next Page
Loading...
Need help?
General