HP Officejet 100 - Connect the printer using Bluetooth; Set up a Bluetooth wireless connection; To set up a Bluetooth wireless connection

English
8
Set up a Bluetooth wireless connection
This section describes how to set up and congure the printer for a Bluetooth wireless connection.
You can congure Bluetooth wireless settings during software installation, or you can congure settings later
using the Toolbox (Windows and Windows Mobile) or the HP Utility (Mac OS X). For more information, see
the user guide.
To set up a Bluetooth wireless connection
Connect the printer using Bluetooth
Mac OS XWindows
1. If you are using an external Bluetooth
adapter for your computer, make sure your
computer is started and then attach the
Bluetooth adapter to a USB port on the
computer.
If your computer has Bluetooth built in, just
make sure the computer is started and that
Bluetooth is turned on.
2. Click System Preferences in the Dock, and
then click Print & Fax.
3. Click + (Add).
4. Select the entry for the printer in the list with
Bluetooth beside its name, and then click
Add.
5. Follow the onscreen instructions to nish the
installation.
Note: If you are using an external Bluetooth
adapter for your computer, specic
instructions for adding the printer might
be different. For more information, see the
documentation or utility provided with the
Bluetooth adapter.
1. If you are using an external Bluetooth
adapter for your computer, make sure your
computer is started and then attach the
Bluetooth adapter to a USB port on the
computer.
If your computer has Bluetooth built in, just
make sure the computer is started and that
Bluetooth is turned on.
2. On the Windows taskbar, click Start, click
Control Panel, click Hardware and Sound,
and then click Add a printer.
- Or -
Click Start, click Printer or Printers and
Faxes, and then double-click the Add Printer
icon or click Add a printer.
3. Follow the onscreen instructions to nish the
installation.
The printer includes a built-in Bluetooth radio. With Bluetooth wireless technology,
you can wirelessly connect to the printer using radio waves in the 2.4 GHz
spectrum.
Bluetooth is typically used for short distances (up to 10 meters or 30 feet).
For more information on using Bluetooth and conguring Bluetooth wireless
settings, see the electronic User Guide available on your computer after you install
the software.
Note: USB cable not required for Bluetooth setup. Do not connect a USB cable.
Tip: You can also congure settings later using the Toolbox (Windows of Window Mobile) or HP Utility
(Mac OS). For more information see the user guide.