4. Use the damp cloth to wipe any residue off the rollers or separator pad.
NOTE: If the residue does not come off using distilled water, try using isopropyl
(rubbing) alcohol.
5. Close the cover of the automatic document feeder.
To clean the plastic strip inside the automatic document feeder
1. Turn off the device and unplug the power cord.
NOTE: Depending how long the device is unplugged, the date and time might
be erased. You might need to reset the date and time later, when you plug the
power cord back in.
2. Lift the cover of the automatic document feeder until it stops, and then gently pry the
cover to release the catch.
3. Continue lifting the automatic document feeder cover to the vertical position.
Maintain the device 23
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...