Guidelines for two-sided (duplex) printing
• Always use media that conforms to the device specifications. For more information, see
Media specifications.
• Do not print on both sides of transparencies, envelopes, photo paper, glossy media, or paper
lighter than 16 lb bond (60 g/m
2
) or heavier than 28 lb bond (105 g/m
2
). Jams might occur with
these media types.
• Several kinds of media require a specific orientation when you print on both sides of a page.
These include letterhead, preprinted paper, and paper with watermarks and prepunched
holes. When you print from a computer running Windows, the device prints the first side of the
media first. Load the media with the print side facing down.
Print resolution
Black print resolution
Up to 600 dpi rendered black (when printing from a computer)
Color print resolution
Up to 4800 x 1200 optimized dpi color on select HP photo papers with 1200 input dpi. Photo
papers include the following:
◦ HP Premium Plus Photo
◦ HP Premium Photo
◦ HP Advanced Photo
Print specifications
Black print resolution
Up to 600 dpi rendered black (when printing from a computer)
Color print resolution
Up to 4800 x 1200 optimized dpi color on select HP photo papers with 1200 input dpi. Photo
papers include the following:
◦ HP Premium Plus Photo
◦ HP Premium Photo
◦ HP Advanced Photo
Copy specifications
• Digital image processing
• Up to 100 copies from original (varies by model)
• Digital zoom: from 25 to 400% (varies by model)
• Fit to page, pre-scan
• Copy speeds vary according to the complexity of the document
Refer to the following table to determine which paper type setting to choose based on the paper
loaded in the main tray.
Paper type Device control panel setting
Plain paper Plain Paper
HP Bright White Paper Plain Paper
HP Premium Presentation Paper, Matte Premium Inkjet
Other inkjet papers Premium Inkjet
Appendix A
140 Technical information
To Next Page
Loading...