USB connection (non-network connection)
The HP Officejet 4630 series supports a rear USB 2.0 High Speed port for connection to a computer.
NOTE: Web services will not be available with a USB direct connection.
To connect the printer with the USB cable
1. Follow the on-screen instructions. When you are prompted, connect the printer to the computer
by selecting USB on the Connection Options screen.
NOTE: Do not connect the USB cable to the printer until you are prompted to do so.
2. Follow the on-screen instructions.
3. Insert the printer software CD in the computer CD-ROM drive.
If the printer software has been installed, the printer will operate as a plug-and-play printer. If the
software has not been installed, insert the CD that came with the printer and follow the on-screen
instructions.
ENWW USB connection (non-network connection) 79
To Next Page
Loading...