ENWW Loading the print media 41
7 Pull out the extension on the output tray.
8 When printing, select the appropriate media type and size in your program or printer
driver.
Selecting the trays
When you copy or print a document, you can allow the all-in-one to select the tray for the job,
or you can select a specific tray.
If you do not select a tray, the all-in-one automatically selects a tray. By default, the all-in-one
draws paper from tray 2 first. However, the all-in-one draws media from tray 1 under the
following conditions:
z Tray 2 is not installed.
z Tray 2 does not have media loaded.
z Tray 2 does not support the media type or size for the job.
To select a tray from the printer driver on your computer
The settings are available in the Source is or Paper Source drop-down menu in Windows
printer drivers, and in the All pages from pop-up menu in the Mac OS printer driver.
To select a default tray from the control panel
1 On the control panel, press MENU.
2 Press
(up) or (down) to move to PRINTER, and then press (select).
3 Press (down) to move to Configure tray, and then press (select).
4 Press (down) to move to Default tray, and then press (select).
5 Press - or + to select the tray, and then press (select).
To Next Page
Loading...