HP Omen X Hardware Reference Guide

a. Remove the cover from the location where you will install the graphics card fan.
b. From the inside of the case, insert the fan into place on the outer wall (1).
c. From the outside of the case, install four screws (2) with the screwdriver/wrench from the tool kit
(Accessing the tool kit on page 9).
d. Replace the cover (3).
5. Replace the access panel.
Installing graphics cards 23

HP Omen X Specifications

General

Operating System	Windows 10
Battery	70 Wh
Refresh Rate	144 Hz
Resolution	1920 x 1080
Processor	Intel Core i7-9750H
Graphics	NVIDIA GeForce RTX 2070