HP OmniBook VT6200 User Manual

Removing the service door
Remove the service door to access the memory module slot, hard drive, regulatory label, and other
components.
To remove the service door:
1. Remove the battery (see
Inserting or removing the battery on page 46).
2. With the battery bay toward you, slide the service door release latch (1) to the left, remove the
screw (if the optional screw is being used) (2), and then slide the release latch again (3) to
release the service door.
3. Slide the service door toward the front of the computer (4) and lift (5) to remove the cover.
Using hard drives 61

HP OmniBook VT6200 Specifications

General

Brand	HP
Model	OmniBook VT6200
Category	Laptop
Language	English