What to do if HP Laptop locks up after replacing a module?
If your HP Laptop locks up after replacing a module and applying power, it might be in a confused state. To resolve this, press the system-off switch. This action resets the computer and restarts it in a known state.
Provides instructions on how to install the computer's main battery.
Details the process of connecting the AC adapter to power the computer.
Explains how to power on the computer for the first time.
Guides through the initial setup process for the Windows operating system.
Covers starting, stopping, and managing the computer's power states.
Explains various methods for starting and stopping the computer.
Provides steps to reset the computer if it becomes unresponsive.
Offers advice on preventing damage to the hard disk drive.
Provides recommendations for protecting your important data.
Explains how to set up password protection for system access.
Describes how to enable the hard disk drive lock feature for security.
Details how to access and use the BIOS Setup utility.
Offers solutions for common computer problems and issues.
Helps resolve issues that prevent the computer from starting correctly.
Explains how to use diagnostic tools to test hardware components.
Guides on restoring the computer's original software and operating system.
Offers specific safety guidelines for handling and using the battery pack.
To Next Page
General
