What to do if HP OmniBook XE4500 turns off immediately after turning on?
If your HP Laptop turns off immediately after turning on, the battery may be extremely low. Try plugging in the AC adapter or inserting a charged battery.
What to do if HP Laptop does not boot from CD in CD/DVD drive?
If your HP Laptop is not booting from the CD in the CD/DVD drive, make sure the CD is bootable. Use BIOS Setup to check the default boot order, and restart the notebook. The cause may be the CD/DVD drive or the motherboard.
What to do if HP OmniBook XE4500 Laptop beeps once, spins hard disk, repeats, but does not boot?
If your HP Laptop is beeping once, spinning the hard disk, and repeating without booting, ensure that at least one SDRAM module is installed. The cause may be SDRAM module.
What to do if HP OmniBook XE4500 hard disk never spins?
If your HP Laptop hard disk never spins, check the power source. Remove and reinstall the hard drive, and check the connector. The cause may be the hard drive or its connector, or the motherboard.
Why my HP Laptop has no power?
If your HP Laptop has no power, ensure that a charged battery is installed or the AC adapter is connected. If possible, try another battery or AC adapter. The cause may be the AC adapter, battery, or motherboard.
What to do if HP OmniBook XE4500 does not run on battery; empty battery indication?
If your HP Laptop is not running on battery and shows an empty battery indication, check the battery and its contacts. If possible, try using another battery to see if the issue persists. The cause may be the battery or its contacts, or the motherboard.
How to fix “Invalid system disk” or “Auto IDE error” on HP OmniBook XE4500 Laptop?
If your HP Laptop displays an error message such as “Invalid system disk” or “Auto IDE error”, first check if there is a disk in the floppy drive. Then, check the boot order in the BIOS Setup. Finally, try removing and reinstalling the hard drive. The cause may be hard drive contacts or the hard drive itself.
What to do if AC adapter does not power HP Laptop?
If your HP Laptop AC adapter does not power the notebook, try using another AC adapter if one is available. The issue may be with the AC adapter or the motherboard.
Why my HP OmniBook XE4500 beeps repeatedly?
If your HP Laptop is beeping repeatedly, it indicates that the battery is low. Connect the AC adapter or replace the battery.
How to fix HP OmniBook XE4500 Laptop that does not boot on AC or battery?
If your HP Laptop doesn't boot whether plugged into AC power or running on battery, try the following: Check the power source first. Then, try a soft reset by pressing and holding the power button to turn the notebook off, and then press the power button again to turn it back on. If that doesn't work, unplug the AC adapter, remove the battery and any PC cards, press the reset button to turn the notebook off, then reconnect the power and try again. Avoid using the touch pad during startup or resuming. Remove all but one SDRAM module and try again, then reinsert any other SDRAM modules and try again. The issue might stem from the AC adapter, SDRAM module, CPU module, switchboard PCA, motherboard, display assembly or hard drive.
Overview of the notebook's external features with illustrations.
Details on operating the notebook, including power modes.
Technical specifications of the HP Omnibook XE4100 and XE4500.
Diagram and description of the notebook's internal module connections.
Diagram illustrating the general disassembly path for accessing components.
Step-by-step guide to removing the user-replaceable battery.
Instructions for removing the user-replaceable SDRAM module.
Guide to removing the wireless LAN mini-PCI card.
Instructions for removing the user-replaceable hard disk drive.
Procedures for replacing small user-replaceable parts.
Steps for removing the keyboard cover.
Instructions for removing the user-replaceable speaker assembly.
Steps for removing the user-replaceable keyboard.
Instructions for removing the user-replaceable switchboard PCA.
Steps for removing the user-replaceable CD/DVD drive.
Procedure for removing the display assembly for authorized service providers.
Procedure for removing the top case for authorized service providers.
Procedure for removing the floppy drive for authorized service providers.
Procedure for removing the I/R PCA for authorized service providers.
Procedure for removing the heatsink and fan assembly.
Procedure for removing the CPU module for authorized service providers.
Procedure for removing the motherboard for authorized service providers.
Steps for replacing components on the bottom case.
Instructions for repairing the BIOS IC using various methods.
Procedures for removing various other notebook components.
Information on support options provided by Authorized Service Providers (ASPs).
General guidelines and steps for troubleshooting notebook issues.
Guidelines to determine abuse and steps to analyze notebook problems.
Procedures to verify that a repair has been successfully completed.
Table outlining the scope of various diagnostic tools for troubleshooting.
Detailed description of the e-Diagtools diagnostic program.
Explanation of the POST process and beep codes for system errors.
Table of POST messages and their explanations for reported problems.
Information on using Sycard PCCtest for PCMCIA slot functionality.
Explanation of Windows Management Instrumentation (WMI) for system information.
Guide to accessing and using the notebook's BIOS Setup utility.
List of parts that can be replaced by the user.
List of replaceable accessory parts for the notebook.
Reference guide for part numbers.
Detailed list of replaceable parts for Omnibook models.
Policy regarding the removal of forgotten system passwords.
Guidelines for assessing cosmetic imperfections on TFT displays.
Guidelines for acceptable LCD display imperfections.
Information on service notes and discontinued parts.
To Next Page
General
