HP OmniBook XE4500 User Manual

2-10 Removal and Replacement HP Omnibook XE4100/XE4500
Removing the Keyboard Cover
(User-Replaceable)
Required Equipment
• Small Phillips screwdriver.
• Small flat-blade screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and then remove the battery.
2. Remove the two screws that secure the keyboard cover to the rear of the notebook.
3. Carefully insert a flat-blade screwdriver blade under the keyboard cover near the right end, and
then gently pry up the center of the cover.
Caution
Be careful not to damage the antenna PCA that is connected to the left and right display assembly
hinges. Damaging either antenna PCA can degrade notebook performance.

HP OmniBook XE4500 Specifications

General

Brand	HP
Model	OmniBook XE4500
Category	Laptop
Language	English