Setup Utility
Maintenance and Service Guide 5–3
Exiting Setup Utility
You can exit Setup Utility with or without saving changes.
■ To exit Setup Utility and save your changes from the current session:
If the Setup Utility menus are not visible, press the esc key to return to the menu display. Then use the arrow
keys to select Exit > Exit Saving Changes, and then press the
enter key.
■ To exit Setup Utility without saving your changes from the current session:
If the Setup Utility menus are not visible, press the esc key to return to the menu display. Then use the arrow
keys to select Exit > Exit Discarding Changes, and then press the
enter key.
After either choice, the computer restarts in Windows.
Setup Utility menus
The menu tables in this section provide an overview of Setup Utility options.
✎
Some of the Setup Utility menu items listed in this chapter might not be supported by the computer.
Main menu
Security menu
Select To Do This
System information ■ View and change the system time and date.
■ View identification information about the computer.
■ View specification information about the processor, memory size,
system
BIOS, and keyboard controller version (select models only).
Select To Do This
Administrator password Enter, change, or delete an administrator password
Power-On Password Enter, change, or delete a power-on password
To Next Page
Loading...
Need help?
General