Removal and replacement procedures
Maintenance and Service Guide 4–21
Remove the keyboard:
1. Remove the three Phillips PM2.5×15.0 screws that secure the keyboard to the computer.
2. Turn the computer display-side up with the front toward you.
3. Open the computer as far as possible.
4. Lift the rear edge of the keyboard 1 until it rests at an angle.
✎
The keyboard is secured by double-sided tape.
5. Slide the keyboard 2 back until the tabs on the bottom of the keyboard are clear of the keyboard cover.
To Next Page
Loading...
Need help?
General