Using the hotkeys
Hotkeys are combinations of the fn key (1) and either the esc key (2) or an action key (3).
Press fn+esc to display information about system hardware components and the system BIOS
version number. Depending on the application you are using, pressing fn and one of the action keys
opens a specific shortcut menu within that application.
To use a hotkey command:
● Press the fn key, and then press the second key of the hotkey command.
– or –
● Press and hold down the fn key, press the second key of the hotkey command, and then release
both keys at the same time.
Using the hotkeys 29
To Next Page
Loading...
Need help?
General