HP Pavilion M703 User Manual

HP Pavilion MX703/M703 Monitor Guide
3
If any of the following conditions occur, unplug
the monitor and contact a qualified service
technician:
■
The power cord or plug is frayed or damaged.
■
You have spilled liquid into the monitor.
■
The monitor has been exposed to rain or
water.
■
The monitor does not operate correctly when
the operating instructions are followed.
■
The monitor has been dropped or the cabinet
has been damaged.
■
The performance of the monitor changes
abruptly.
Additional Safety Information
This product has been evaluated for connection
to an “IT” power system (an AC distribution
system with no direct connection to earth,
according to IEC 950).
AC Power Safety Warning
Warning:
Locate the monitor near an
AC outlet. The AC power cord is your HP
monitor’s main AC disconnecting device
and must be easily accessible at all times.
For your safety, the power cord provided
with your system has a grounded plug.
Always use the power cord with a
properly grounded wall outlet to avoid
the risk of electrical shock.
Working in Comfort
To optimize your comfort and productivity,
it’s important that you set up your work area
correctly and use your HP equipment properly.
With that in mind, we have developed some
setup and use recommendations for you to follow
based on established ergonomic principles.
You can consult the onscreen version of “Working
in Comfort” in the Help and Support Center, or
visit HP’s Working in Comfort Web site at:
http://www.hp.com/ergo

HP Pavilion M703 Specifications

General

Brand	HP
Model	Pavilion M703
Category	Monitor
Language	English