HP pavilion Series User Manual

Fan
Description Spare part number
Fan (includes cable) 856206-001
Before removing the fan, follow these steps:
1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see Bottom cover on page 24).
5. Remove the battery (see Battery on page 26).
6. Remove the WLAN module (see WLAN module on page 29).
Remove the fan:
1. Disconnect the fan cable (1) from the system board.
2. Remove the three Phillips PM2.0×5.7 screws (2) that secure the fan to the keyboard/top cover.
3. Remove the fan (3).
Reverse this procedure to install the fan.
Component replacement procedures 33

HP pavilion Series Specifications

General

Series	Pavilion
Category	Laptop
Processor	Intel Core or AMD Ryzen
RAM	Up to 32 GB DDR4 (varies by model)
Storage	Up to 1 TB SSD
Display	14"/15.6"/17.3" FHD IPS
Graphics	Intel UHD Graphics or AMD Radeon Graphics or NVIDIA GeForce MX series (varies by model)
Operating System	Windows 10
Battery	Up to 8 hours
Ports	USB Type-A, USB Type-C, HDMI, SD card reader, headphone/mic combo
Wireless	Wi-Fi 6, Bluetooth