2 537498-001 — Removing and Replacing the Front Panel
Removing and Replacing the Front Panel
15 minutes
Before You Begin
Observe the following requirements before removing and
replacing the front panel.
Removing the Front Panel
1 Turn off the computer.
2 If your system has one, remove the HP Pocket Media
Drive from the bay.
Tools Needed
Flathead screwdriver
You can use a flathead screwdriver or a
T15 TORX screwdriver with the following
screw (Torque screw).
CAUTION: Static electricity can damage
the electronic components inside the
computer. Discharge static electricity by
touching the metal cage of the computer
before touching any internal parts or
electronic components.
WARNING:
Never open the cover with the
power cord attached or power
applied. You may damage your
computer or be injured from the
spinning fan blades.
Avoid touching sharp edges
inside the computer.
NOTE: Computer features may vary by model.
To Next Page
Loading...
Need help?
General