4 537498-001 — Removing and Replacing the Front Panel
Replacing the Front Panel
1 Insert the three tabs on the front panel into the slots on
the computer.
2 Swing the front panel toward the computer, and press
it into place.
3 Lay the computer on its side.
4 Insert the bottom of the side panel into the slots in the
computer rail, and then swing the panel down onto
the computer.
5 Slide the panel toward the front of the computer until
there is no gap.
IMPORTANT: The new (replacement) part may not look
the same as the original part, due to different
manufacturers or models. Hewlett-Packard always
provides quality parts that meet or exceed your original
computer specifications.
To Next Page
Loading...
Need help?
General